Water Damage Restoration – What Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the home could be because of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. There are two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and also the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage as a result of water guide is the benchmark tool which is used by companies focusing on restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the foremost and the most crucial part of water damage and mold restoration. The assessment has to be correct to ensure that the right response can be utilized. In restorating the injury due to water, technicians and the insurance firms must work together and understand what is damaged and the way to restoring the harm. Identifying the origin from the damage, documentation of damage, and accurate estimates are mandatory to get a proper water damage and mold restoration. Categorization is based on the contamination levels of the water source. The categories are the following
Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This really is water that has some contaminants like water from the dishwasher, washing machine or toilet with urine.
Category 3 – This can be water which is highly unsanitary and can do causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a few examples.
Decontamination and Drying – After the evaluation is complete, the whole process of drying and decontaminating begins on the site. Based on the extent of damage, damage caused due to water can be classified into 4 types. Class 1 Damage- When loss is fixed to some small area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – Once the damage is to the whole room and carpet area. Class 3 Damage – Once the entire area is saturated with water and sophistication 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is actually a key stage in Water damage and mold restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments must be used. Decontamination must be done if contamination has become detected in the region. Decontamination may be performed for the entire area or even in specific pockets where contamination has been detected.
Monitoring and Completion – Monitoring the restoration procedure for damage caused because of damage is crucial to achieve the desired results. One has to be proactive through the monitoring process. Checking when the drying tools are setup properly, assessing when the personnel involved are qualified to do the job and checking when the equipments have been in working order inwtsy all portion of the monitoring process. Necessary steps have to be taken if anything wrong is spotted throughout the monitoring process. The complete procedure of water damage and mold restoration will be considered complete just once the humidity, temperature as well as the moisture content is just as per industry standards. Upon finishing of the water damage restoration process, the drying equipment can be removed.